I/O Features In Cyclone V Devices; I/O Resources Per Package For Cyclone V Devices - Altera Cyclone V Device Handbook

Hide thumbs Also See for Cyclone V:
Table of Contents

Advertisement

2014.01.10
CV-52005
Subscribe
This chapter provides details about the features of the Cyclone V I/O elements (IOEs) and how the IOEs
work in compliance with current and emerging I/O standards and requirements.
The Cyclone V I/Os support the following features:
Single-ended, non-voltage-referenced, and voltage-referenced I/O standards
Low-voltage differential signaling (LVDS), RSDS, mini-LVDS, HSTL, HSUL, and SSTL I/O standards
Serializer/deserializer (SERDES)
Programmable output current strength
Programmable slew-rate
Programmable bus-hold
Programmable pull-up resistor
Programmable pre-emphasis
Programmable I/O delay
Programmable voltage output differential (V
Open-drain output
On-chip series termination (R
On-chip parallel termination (R
On-chip differential termination (R
High-speed differential I/O support
Note:
The information in this chapter is applicable to all Cyclone V variants, unless noted otherwise.
Related Information
Cyclone V Device Handbook: Known Issues
Lists the planned updates to the Cyclone V Device Handbook chapters.

I/O Resources Per Package for Cyclone V Devices

The following package plan tables for the different Cyclone V variants list the maximum I/O resources
available for each package.
2014 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS and STRATIX words
and logos are trademarks of Altera Corporation and registered in the U.S. Patent and Trademark Office and in other countries. All other
words and logos identified as trademarks or service marks are the property of their respective holders as described at
www.altera.com/common/legal.html. Altera warrants performance of its semiconductor products to current specifications in accordance with
Altera's standard warranty, but reserves the right to make changes to any products and services at any time without notice. Altera assumes
no responsibility or liability arising out of the application or use of any information, product, or service described herein except as expressly
agreed to in writing by Altera. Altera customers are advised to obtain the latest version of device specifications before relying on any published
information and before placing orders for products or services.
www.altera.com
101 Innovation Drive, San Jose, CA 95134

I/O Features in Cyclone V Devices

Send Feedback
)
OD
OCT) with and without calibration
S
OCT)
T
OCT)
D
5
ISO
9001:2008
Registered

Advertisement

Table of Contents
loading

Table of Contents