Table of Contents
Advertisement
Figure 9-8. SRU Connections for SPORT0
For each bidirectional line, the SPORT provides three separate signals.
For example, a SPORT clock has three separate SRU connections (instead
of one physical pin):
• input clock to the SPORT (
• output clock of the SPORT (
• output enable clock of the SPORT (
If the SPORT operates in master mode, the
SPORTx_CLK_PBEN
mode, the
SPORTx_CLK_O
disabled and the
The input and output signal pair is never used simultaneously. The
pin enable signal dictates which of the two SPORT lines appear at
the DAI pin at any given time. By connecting all three signals
through the SRU, the standard SPORT configuration registers
ADSP-214xx SHARC Processor Hardware Reference
www.BDTIC.com/ADI
Digital Application/Digital Peripheral Interfaces
SPORT0_CLK_I
SPORT0_CLK_O
SPORT0_CLK_PBEN_O
SPORT0_FS_I
SPORT0_FS_O
SPORT0_FS_PBEN_O
SPORT0_DA_I
SPORT0_DA_O
SPORT0_DA_PBEN_O
SPORT0_DB_I
SPORT0_DB_O
SPORT0_DB_PBEN_O
signals are automatically driven. If operating in slave
and
SPORTx_CLK_PBEN
signal expects an external clock.
SPORTx_CLK_I
Interface
to SRU
)
SPORTx_CLK_I
)
SPORTx_CLK_O
SPORTx_CLK_PBEN_O
SPORTx_CLK_O
signals are automatically
)
and
9-15
Advertisement
Chapters
Table of Contents
