Freescale Semiconductor PowerQUICC MPC885 Reference Manual page 353

Table 12-1. MPC885/MPC880 Signal Descriptions (continued)
Hard
Name
Reset
MII1_COL Hi-Z
Power supply
1
Pulled low if RSTCONF pulled down.
2
High until DPLL locked, then oscillates.
3
See Section 11.4, "TRST
12.2 MPC875/MPC870 Signals
The following sections describe the signals, their descriptions, and pin numbers.
12.2.1 MPC875/MPC870 Signals and Pin Numbers
Figure 12-3 and Figure 12-4
Freescale Semiconductor
Number Type
U12 Input
See Power
Figure 12-1
Considerations," and Section 54.6, "Recommended TAP Configuration."
show MPC875 signals and pin numbers.
MPC885 PowerQUICC Family Reference Manual, Rev. 2
Description
MII1_COL—Media-independent interface 1, collision
VDDL—Power supply of the internal logic
VDDH—Power supply of the I/O buffers and certain parts of the
clock control
VDDSYN—Power supply of the PLL circuitry
GND—Ground for circuits, except for the PLL circuitry
VSSSYN, VSSSYN1—Ground for the PLL circuitry
External Signals
12-23