ADTRAN AOS Version R10.1.0 Command Reference Manual page 671

Command Reference Guide
show mail-client body <agent name>
Use the show mail-client body command to display the current buffer content for the body of the email
message in queue for a specific mail agent.
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Syntax Description
<agent name>
Default Values
No default values are necessary for this command.
Command History
Release 17.2
Usage Examples
The following example displays the email body buffer content for myagent mail agent:
>enable
#show mail-client body myagent
60000CRG0-35E
Specifies the mail agent buffer to display.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
671