ADTRAN AOS Version R10.1.0 Command Reference Manual page 597

Command Reference Guide
show ip rtp media-anchoring sessions
Use the show ip rtp media-anchoring sessions command to display all of the anchored Realtime
Transport Protocol (RTP) flow associations and the number of relayed packets per association currently
active in an anchored RTP flow. In addition, the time to live (TTL) for the association is displayed.
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Syntax Description
No subcommands.
Default Values
No default values are necessary for this command.
Command History
Release R10.1.0
Usage Examples
The following example displays a summary of all gathered media-anchoring statistics:
#show ip rtp media-anchoring sessions
CallID Anchored Address
--------------------------------------------------------------------------------------------------------------------------
7 10.10.10.1:40008
7 10.17.250.12:40010
7 10.10.10.1:40009
7 10.17.250.12:40011
60000CRG0-35E
Command was introduced.
Remote Address
10.10.10.2:2230
10.17.250.14:10262
10.10.10.2:2231
10.17.250.14:10263
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
TTL Packets
45 108062
45 108063
44 432
44 432
Ovrd Type
No Audio
No Audio
No Audio
No Audio
597