ADTRAN AOS Version R10.1.0 Command Reference Manual page 194

Command Reference Guide
Default Values
No default values are necessary for this command.
Command History
Release 8.1
Release 16.1
Usage Examples
The following example copies the dynamic voice configuration file and saves it to the CompactFlash card
using the name myvoice-config:
>enable
#copy dynvoice-config cflash myvoice-config
Percent Complete 100%
The following example copies the dynamic voice configuration file and saves it to flash memory using the
name myvoice-config:
>enable
#copy dynvoice-config flash myvoice-config
Percent Complete 100%
The following example replaces the active running configuration with a copy of the dynamic voice
configuration file:
>enable
#copy dynvoice-config running-config
Percent Complete 100%
The following example copies the dynamic voice configuration file and saves it to the TFTP server:
>enable
#copy dynvoice-config tftp
Address of remote host?10.200.2.4
Destination filename?myvoice-config
Initiating TFTP transfer...
Sent 5221 bytes.
Transfer complete.
60000CRG0-35E
Command was introduced.
Command was expanded to include HTTP.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
194