ADTRAN AOS Version R10.1.0 Command Reference Manual page 924

Command Reference Guide
crypto ike remote-id
Use the crypto ike remote-id command to specify the remote ID and to associate a preshared key with the
remote ID. Use the no form of this command to disable these features. Variations of this command include
the following:
crypto ike remote-id address <ip address>
crypto ike remote-id address <ip address> <option>
crypto ike remote-id any
crypto ike remote-id any <option>
crytpo ike remote-id asn1-dn <name>
crypto ike remote-id asn1-dn <name> <option>
crypto ike remote-id fqdn <name>
crypto ike remote-id fqdn <name> <option>
crypto ike remote-id user-fqdn <name>
crypto ike remote-id user-fqdn <name> <option>
The AOS virtual private network (VPN) feature must be enabled (using the ip crypto
command) for the VPN tunnel to be activated.
For VPN configuration example scripts, refer to the VPN configuration guide located on
the AOS Documentation CD provided with your unit.
Syntax Description
address <ip address>
any
asn1-dn <name>
fqdn <name>
user-fqdn <name>
<option>
<wildcard mask>
60000CRG0-35E
Specifies a valid remote IP address. IP addresses should be
expressed in dotted decimal notation (for example,
10.10.10.1).
Allows any remote ID (type and value).
Specifies an abstract syntax notation distinguished name as
the remote ID (enter this value in (Lightweight Directory
Access Protocol (LDAP) format).
Specifies a fully qualified domain name (FQDN) (e.g.,
adtran.com) as the remote ID.
Specifies a user FQDN or email address (e.g.,
user1@adtran.com) as the remote ID.
Specifies an optional parameter corresponding to this remote
ID. Optional parameters include the following list:
Optional. Specifies the wildcard mask that corresponds to a
range of IP addresses (network) or a specific host. Wildcard
masks are expressed in dotted decimal notation (for
example, 0.0.0.255).
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
924