ADTRAN AOS Version R10.1.0 Command Reference Manual page 498

Command Reference Guide
ramdisk
usbdrive0
Default Values
No default values are necessary for this command.
Command History
Release 1.1
Release 12.1
Release 17.1
Release 17.7
Release 18.2
Usage Examples
The following is sample output from the show file cflash command:
>enable
#show file cflash startup-config
Router#show file startup-config
Using 2558 bytes
!
!
hostname "Router"
enable password password
!
clock timezone -6-Central-Time
!
ip subnet-zero
ip classless
ip routing
!
no auto-config
!
event-history on
no logging forwarding
no logging email
logging email priority-level info
!
no service password-encryption
!
username "admin" password "password"
!
--MORE--
60000CRG0-35E
Specifies a file located in volatile RAM disk.
Specifies a file located in Universal Serial Bus (USB) flash drive memory.
Command was introduced.
Command was expanded to include the cflash parameter.
Command was expanded to include the modifiers begin, exclude, and
include.
Command was expanded to include the ramdisk parameter.
Command was expanded to include the usbdrive0 parameter.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
498