ADTRAN AOS Version R10.1.0 Command Reference Manual page 1074

Command Reference Guide
<distance>
track <name>
tag <number>
Default Values
No default values are necessary for this command.
Command History
Release 16.1
Release 17.5
Functional Notes
VRF on AOS products allows a single physical router to be partitioned into multiple virtual routers. Each
router instance has its own route table and interface assignments. Beginning with Release 16.1, all AOS
routers supporting multiple VRF instances (multi-VRF) have an unnamed default VRF instance regardless
of whether multi-VRF is configured.
The VRF must have already been created (using the command
1460) before static routes can be configured.
Usage Examples
The following example adds a static route to the routing and forwarding tables used for the VRF RED:
(config)#ip route vrf RED 10.220.0.0 255.255.0.0 192.22.45.254
(config)#ip route vrf RED 0.0.0.0 0.0.0.0 175.44.2.10
60000CRG0-35E
Optional. Specifies an administrative distance associated with a particular
router used to determine the best route when multiple routes to the same
destination exist. The lower the administrative distance, the more preferable
the route. Range is 1 to 255.
Optional. Enables tracking on the indicated route. Once the named track
enters a fail state, the route specified by the command is disabled and traffic
will no longer be routed using that route. For more information on
configuring tracks, refer to
Optional. Specifies a number to use as a tag for this route. Route tags are
used to label and filter routes when dynamically redistributing routes into a
routing protocol (such as Routing Information Protocol (RIP)/open shortest
path first (OSPF)/Border Gateway Protocol (BGP)). Range is 1 to 65535.
Command was introduced.
Command was expanded to include the loopback interface.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
track <name> on page
vrf <name> route-distinguisher on page
1372.
1074