Command Reference Guide
Default Values
No default values are necessary for this command.
Command History
Release 4.1
Release 15.1
Release 17.1
Release 17.6
Release A4.01
Usage Examples
The following is sample output from the show crypto ipsec sa command:
>enable
#show crypto ipsec sa
Using 2 SAs out of 4000
Peak concurrent SAs: 2
IPsec Security Associations:
Peer IP Address: 3.3.3.1
Remote ID: 3.3.3.2
Crypto Map: VPN 10
Direction: Inbound
Encapsulation: ESP
SPI: 0xF38B37A1 (4085987233)
FFE ID: 1
RX Bytes: 281728
Selectors: Src:10.0.2.0/255.255.255.0 Port:ANY Proto:ALL IP
Dst:10.0.1.0/255.255.255.0 Port:ANY Proto:ALL IP
Hard Lifetime: 28570
Soft Lifetime: 0
Out-of-Sequence Errors: 0
60000CRG0-35E
Command was introduced.
Command was expanded to include the brief parameter.
Command was expanded to include the modifiers begin, exclude, and
include.
Command was expanded to include the ffe-id parameter.
Command was expanded to include the timeline parameter.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
459