ADTRAN AOS Version R10.1.0 Command Reference Manual page 428

Command Reference Guide
<subnet mask>
<ipv6 address/prefix-length> Optional. Specifies a valid IPv6 address and prefix. IPv6 addresses should
summary
Default Values
No default values are necessary for this command.
Command History
Release 8.1
Release 17.1
Release 18.3
Release R10.1.0
Usage Examples
The following sample output of the show bgp ipv4 summary command shows a summarized list of the
configured BGP neighbors, as well as their status and statistics.
>enable
#show bgp ipv4 summary
BGP router identifier 192.168.3.1, local AS number 304
8 network entries, 5 paths, and 23 BGP path attribute entries
Neighbor V
10.22.131.1 4
10.22.131.9 4
10.22.132.9 4
10.22.134.1 4
10.22.134.10 4
10.22.134.26 4
10.22.134.34 4
60000CRG0-35E
Optional. Specifies the subnet mask that corresponds to a range of IPv4
addresses (network) or a specific host. Subnet masks can be expressed in
dotted decimal notation (for example, 255.255.255.0) or as a prefix length
(for example, /24).
be expressed in colon hexadecimal format (for example,
2001:DB8:3F::/48).
Optional. Displays the status of all BGP connections.
Command was introduced.
Command was expanded to include the modifiers begin, exclude, and
include.
Command syntax was changed to remove the ip keyword for IPv6 support
in ADTRAN internetworking products. Command was also expanded to
include the any-vrf, ipv4, and vrf <name> parameters.
Command syntax was changed to remove the ip keyword for IPv6 support
in ADTRAN voice products. Command was also expanded to include the
ipv6 and <ipv6 address/prefix-length> parameters.
AS MsgRcvd
302 95
302 97
303 200
304 166
304 174
304 172
304 164
Copyright © 2012 ADTRAN, Inc.
MsgSent InQ OutQ
104 0
105 0
179 0
178 0
179 0
174 0
174 0
Enable Mode Command Set
Up/Down State/PfxRcd
0 01:30:06
0 01:30:07
0 02:43:09
0 02:43:15
0 02:43:24
0 02:41:43
0 02:41:40
9
21
21
3
7
10
4
428