ADTRAN AOS Version R10.1.0 Command Reference Manual page 1014

Command Reference Guide
ip firewall fin-timeout <value>
Use the ip firewall fin-timeout command to specify the time period allowed for Transmission Control
Protocol (TCP) FIN. Use the no form of this command to return to the default setting.
The AOS firewall must be enabled (using the command
stateful inspection firewall to be activated.
Syntax Description
<value>
Default Values
By default, ip firewall fin-timeout is set to 4 seconds.
Command History
Release 10.1
Usage Examples
The following example sets the TCP FIN time period to 120 seconds:
(config)#ip firewall fin-timeout 120
60000CRG0-35E
Specifies the time period in seconds allowed for TCP FIN. Range is 0 to
4294967295 seconds.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
ip firewall on page 999) for the
1014