ADTRAN AOS Version R10.1.0 Command Reference Manual page 1124

Command Reference Guide
ip sip hmr
Use the ip sip hmr command to apply a Session Initiation Protocol (SIP) header manipulation rule (HMR)
policy to all SIP traffic on the AOS device. Use the no form of this command to remove the HMR policy.
Variations of this command include:
ip sip hmr <name> in
ip sip hmr <name> out
Syntax Description
<name>
in
out
Default Values
By default, no SIP HMR policies are applied to SIP traffic.
Command History
Release R10.1.0
Functional Notes
For more information about SIP HMR and its uses and configuration, refer to the configuration guide
Manipulating SIP Headers and Messages in AOS, available online at
(article number 3526).
Usage Examples
The following example adds the HMR policy MYPOLICY1 to the AOS unit for all inbound SIP traffic:
(config)#ip sip hmr MYPOLICY1 in
60000CRG0-35E
Specifies the name of the HMR policy to apply to the SIP traffic.
Specifies that the HMR policy is applied to ingress SIP traffic.
Specifies that the HMR policy is applied to egress SIP traffic.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
https://supportforums.adtran.com
1124