ADTRAN AOS Version R10.1.0 Command Reference Manual page 670

Command Reference Guide
show mail-client
Use the show mail-client command to display statistical summary information for mail agents. Variations
of this command include:
show mail-client
show mail-client <agent name>
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Syntax Description
<agent name>
Default Values
No default values are necessary for this command.
Command History
Release 17.2
Usage Examples
The following example displays statistical information for mail agent myagent:
>enable
#show mail-client myagent
Mail-client myagent is ENABLED
Capture output when track mail becomes PASS
Send message when track T becomes PASS
Send TO: joesmith@company.com
6 output captures triggered
18 commands captured
6 command errors
2 unrecognized commands
4 truncated commands
5 emails sent
Last email sent on 2/29/2008 at 16:20:10 PM
60000CRG0-35E
Optional. Specifies only statistics for the named mail agent are displayed.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
670