ADTRAN AOS Version R10.1.0 Command Reference Manual page 892

Command Reference Guide
as-path-list <name>
Use the as-path-list command to create IP autonomous system (AS) path lists for route map use. Use the
no form of this command to delete the AS path list.
Syntax Description
<name>
Default Values
By default, no AS path lists are defined.
Command History
Release 9.3
Release R10.1.0
Functional Notes
AS path lists are a type of route filter that permits or denies Border Gateway Protocol (BGP) routes based
on the AS_PATH attribute. AS path lists define a list of AS specifications that, once created, may then be
referenced in a route map. Refer to the Usage Examples section below.
Usage Examples
The following example creates the AS path list list5 and enters the IP as-path-list command mode:
(config)#as-path-list list5
(config-as-path-list)#
60000CRG0-35E
Specifies the name of the AS path list. Refer to
on page 2855 for more information on the available options.
Command was introduced.
The ip keyword was removed from this command.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
AS Path List Command Set
892