ADTRAN AOS Version R10.1.0 Command Reference Manual page 893

Command Reference Guide
auto-config
Use the auto-config command to enable the automatic self-configuration feature in AOS. For more
detailed information, refer to the Auto-Config configuration guide on the AOS Documentation CD. Use the
no form of this command to halt the automatic configuration process. Variations of this command include:
auto-config
auto-config filename <name>
auto-config restart
auto-config retry-count <number>
auto-config server [<hostname> | <ip address>]
Syntax Description
filename <name>
restart
retry-count <number>
server [<hostname> | <ip address>] Optional. Specifies the IP address or host name of Trivial File
Default Values
By default, automatic configuration is disabled.
Command History
Release 11.1
Usage Examples
The following example enables automatic configuration:
(config)#auto-config
Disabling and re-enabling auto-config restarts the download process.
The following command specifies the name of the file to download:
(config)#auto-config filename myConfig
60000CRG0-35E
Optional. Specifies the configuration file name to download.
Optional. Restarts automatic configuration parameters.
Optional. Specifies the maximum number of retries. Range is
0 to 1000.
Transfer Protocol (TFTP) server from which to download. IP
addresses should be expressed in dotted decimal notation (for
example, 10.10.10.1).
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
893