ADTRAN AOS Version R10.1.0 Command Reference Manual page 1034

Command Reference Guide
ip igmp join <ip address>
Use the ip igmp join command to instruct the router stack to join a specific group. The stack may join
multiple groups. Use the no form of this command to disable this feature.
Syntax Description
<ip address>
Default Values
No default values are necessary for this command.
Command History
Release 7.1
Functional Notes
This command aids in debugging, allowing the router's IP stack to connect to and respond on a multicast
group. The local stack operates as an Internet Control Messaging Protocol (ICMP) host on the attached
segment. In multicast stub applications, the global helper address takes care of forwarding IGMP
joins/responses on the upstream interface. The router may respond to ICMP echo requests for the joined
groups.
Usage Examples
The following example configures the unit to join with the specified multicast group:
(config)#ip igmp join 172.0.1.50
60000CRG0-35E
Specifies the IP address of a multicast group. IP addresses should be
expressed in dotted decimal notation (for example, 10.10.10.1).
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1034