ADTRAN AOS Version R10.1.0 Command Reference Manual page 1092

Command Reference Guide
ip rtp quality-monitoring sample one-out-of <number>
Use the ip rtp quality-monitoring sample one-out-of command to limit the number of Realtime
Transport Protocol (RTP) streams monitored by voice quality monitoring (VQM). Use the no form of this
command to disable VQM sampling.
Syntax Description
<number>
Default Values
By default, the VQM sampling rate is set to 1, which means that all RTP streams are monitored.
Command History
Release 17.1
Usage Examples
The following example specifies that VQM monitors 10 percent of all streams (one out of every 10):
(config)#ip rtp quality-monitoring sample one-out-of 10
60000CRG0-35E
Specifies the VQM jitter buffer sampling rate, which causes VQM to only
monitor 1 out of the specified number of RTP streams. Range is 1 to 100.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1092