ADTRAN AOS Version R10.1.0 Command Reference Manual page 314

Command Reference Guide
debug ip security monitor
Use the debug ip security monitor command to activate debug messages associated with the IP security
monitor. Debug messages are displayed (real time) on the terminal (or Telnet) screen. Use the no form of
this command to disable the debug messages.
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
No subcommands.
Default Values
By default, all debug messages in AOS are disabled.
Command History
Release 17.5
Functional Notes
The debug ip security monitor events include statistic collection associated with the timeline.
Usage Examples
The following is sample output for this command:
>enable
#debug ip security monitor
SECURITY_MONITOR.EVENTS Regular update: timeline interval scheduled to end at 23:00:16
SECURITY_MONITOR.EVENTS [ curr=269095, sched=272343 ]
SECURITY_MONITOR.EVENTS Regular update: timeline interval scheduled to end at 23:00:16
SECURITY_MONITOR.EVENTS [ curr=269154, sched=272343 ] no debug ip security monitor
#
60000CRG0-35E
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
314