Table of Contents
Advertisement
Command Reference Guide
ip sip qos dscp <value>
Use the ip sip qos dscp command to configure the differentiated services code point (DSCP) value to mark
IP Session Initiation Protocol (SIP) packets with. This marking can then be used by the quality of service
(QoS) mechanisms to give priority for this type of traffic in the unit. Use the no form of this command to
disable this feature.
Syntax Description
<value>
Default Values
No default values are necessary for this command.
Command History
Release 10.1
Usage Examples
The following example sets the DSCP value to 63:
(config)#ip sip qos dscp 63
60000CRG0-35E
Specifies the DSCP value. Valid range is 0 to 63.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1155
Advertisement
Table of Contents
