Show Ip Traffic - ADTRAN AOS Version R10.1.0 Command Reference Manual

Command Reference Guide

show ip traffic

Use the show ip traffic command to display all Internet Protocol version 4 (IPv4) traffic statistics.
Variations of this command include:
show ip traffic
show ip traffic netstat
show ip traffic realtime
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Using the realtime argument for this command can adversely affect the performance of
your unit.
Syntax Description
netstat
realtime
Default Values
No default values are necessary for this command.
Command History
Release 3.1
Release 10.1
Release 17.1
Release 17.5
60000CRG0-35E
Optional. Displays active IPv4 Transmission Control Protocol (TCP)
connections.
Optional. Displays full-screen output in real time. Refer to the Functional
Notes below for more information.
Command was introduced.
The realtime display parameter was introduced.
Command was expanded to include the modifiers begin, exclude, and
include.
Command was expanded to include the netstat keyword.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
613