ADTRAN AOS Version R10.1.0 Command Reference Manual page 1100

Command Reference Guide
ip rtp udp <number>
Use the ip rtp udp command to configure a global starting User Datagram Protocol (UDP) port for
Realtime Transport Protocol (RTP). Use the no form of this command to remove a configured UDP port.
Syntax Description
<number>
Default Values
The default value for this command is 10000.
Command History
Release 10.1
Release 14.1
Usage Examples
The following example configures 2000 as the starting value of the UDP port:
(config)#ip rtp udp 2000
60000CRG0-35E
Specifies the value of the starting UDP port. Valid range is 1026 to 60000.
Command was introduced.
Command was updated.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1100