Command Reference Guide
The following is sample output of the show probe responder icmp-timestamp command:
>enable
#show probe responder icmp-timestamp
0--------------1----------------2----------------3----------------4---------------5----------------6----------------7---------------8
12345678901234567890123456789012345678901234567890123456789012345678901234567890
ICMP Timestamp: 125 rcvd, 125 sent
The following is sample output of a TWAMP type probe named Houston:
>enable
#show probe Houston
0--------------1----------------2----------------3----------------4---------------5----------------6----------------7---------------8
12345678901234567890123456789012345678901234567890123456789012345678901234567890
Probe Houston:
Current State: PASS Admin. Status: UP
Type: TWAMP Period: 60 Timeout: 1500
Source: 192.168.1.255:17001 Destination: 10.10.20.254:17000
Data Size: 14 Num-packets 100 DSCP: 0
Data pad: Zero
Send-schedule: 20 msec Type: periodic
Authentication Mode: open
Tracked by: Nothing
Tests Run: 194 Failed: 1
Tolerance: not set
Time in current state: 1 days, 2 hours, 50 minutes, 7 seconds
Packet Loss
fail
Round Trip
1000
60000CRG0-35E
Key: not set
pass
1000
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
705