ADTRAN AOS Version R10.1.0 Command Reference Manual page 788

Command Reference Guide
show voice alias
Use the show voice alias command to display alias parameters. Aliases are used to mask identity settings,
such as names and extensions. Variations of this command include:
show voice alias
show voice alias global
show voice alias group
show voice alias system
show voice alias user
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Syntax Description
global
group
system
user
Default Values
No default values are necessary for this command.
Command History
Release 12.1
Release 17.1
Usage Examples
The following example shows sample output from the show voice alias command:
>enable
#show voice alias
Alias Translation
----------------- --------------- ------------------
MyAlias 4433
Total Displayed: 1
60000CRG0-35E
Optional. Displays global aliases.
Optional. Displays group aliases.
Optional. Displays system aliases.
Optional. Displays user aliases.
Command was introduced.
Command was expanded to include the modifiers begin, exclude, and
include.
Type
Global
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
788