ADTRAN AOS Version R10.1.0 Command Reference Manual page 952

Command Reference Guide
ftp authentication <listname>
Use the ftp authentication command to specify that an authentication, authorization, and accounting
(AAA) authentication method list is used by the AOS device's internal File Transfer Protocol (FTP) server
for FTP authentication. AAA must be enabled to apply the method list to FTP authentication. Use the no
form of this command to remove the authentication method list from FTP authentication.
Syntax Description
<listname>
Default Values
By default, no AAA authentication method list is applied to FTP. If AAA is enabled (using the command
on on page 889), but no list is assigned to FTP, FTP automatically uses the local user list for
authentication.
Command History
Release 5.1
Functional Notes
AAA must be enabled for an authentication list to be applied to FTP authentication. For more information
on enabling AAA, refer to the command
AAA authentication lists for use with FTP can be lists that control user login permissions or lists that control
user Enable mode access permissions. These lists are created using the following commands:
authentication login on page 871
For more information on AAA configuration, refer to the configuration guide Configuring AAA in AOS
available online at https://supportforums.adtran.com.
Usage Examples
The following example attaches the authentication method list MyList to the FTP server:
(config)#ftp authentication MyList
60000CRG0-35E
Specifies the AAA authentication method list to apply to FTP authentication.
Command was introduced.
aaa on on page
and aaa authentication enable default on page
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
889.
aaa
aaa
867.
952