ADTRAN AOS Version R10.1.0 Command Reference Manual page 274

Command Reference Guide
debug interface cellular
Use the debug interface cellular command to activate debug messages associated with the cellular
interface. Debug messages are displayed (real time) to the terminal (or Telnet) screen. Use the no form of
this command to disable the debug messages. Variations of this command include:
debug interface cellular
debug interface cellular <slot/port>
debug interface cellular <slot/port> data
debug interface cellular <slot/port> data-hdlc
debug interface cellular <slot/port> diag-hdlc
debug interface cellular <slot/port> diagnostic
debug interface cellular <slot/port> diagnostic rx
debug interface cellular <slot/port> diagnostic tx
debug interface cellular <slot/port> diagnostic both
debug interface cellular <slot/port> download
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
<slot/port>
data
data-hdlc
diag-hdlc
diagnostic
diagnostic rx
diagnostic tx
diagnostic both
download
Default Values
By default, all debug messages in AOS are disabled.
60000CRG0-35E
Optional. Activates debug messages for the specified cellular interface.
Optional. Activates debug messages for the handshaking signals on the
data channel.
Optional. Activates debug messages for high level data link control (HDLC)
errors on the data channel.
Optional. Activates debug messages for HDLC errors on the diagnostic
channel.
Optional. Activates debug messages for all packets.
Optional. Activates debug messages for packets moving from the cellular
interface to the network.
Optional. Activates debug messages for packets moving from the network
to the cellular interface.
Optional. Activates debug messages for both transmitted and received
packets.
Optional. Activates debug messages for application downloads.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
274