ADTRAN AOS Version R10.1.0 Command Reference Manual page 805

Command Reference Guide
show voice operator-group
Use the show voice operator-group command to display all operator groups.
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Syntax Description
No subcommands.
Default Values
No default values are necessary for this command.
Command History
Release 14.1
Release 17.1
Usage Examples
The following example displays all operator groups:
>enable
#show voice operator-group
Operator-group: 0 Call distribution type: all
Number of calls allowed: 1
Number of rings before coverage: 4
Extension Firstname
-------------------------------------------------------------------------------------
2001 John
Order # of Rings
---------------------------------------------------------------------
1 0
2 2
3 2
4 2
5 2
60000CRG0-35E
Command was introduced.
Command was expanded to include the modifiers begin, exclude, and
include.
Lastname Logged In
Smith
Call Coverage Action
Auto Attendant
None
None
None
None
Copyright © 2012 ADTRAN, Inc.
83.
*
Enable Mode Command Set
805