ADTRAN AOS Version R10.1.0 Command Reference Manual page 375

Command Reference Guide
smdr
<number>
stationaccount
<extension>
statusgroups
summary
switchboard
<subsource>
call
call <subsource>
ccm
toneservices
<notifies>
<interface>
<interface> <slot/port>
trunkaccount
<trunk id>
<trunk id> <appearance> Optional. Specifies specific trunk appearance.
trunkmanager
<trunk id>
trunkport
<slot:port:DS0>
verbose
Default Values
By default, all debug messages in AOS are disabled.
60000CRG0-35E
Activates all station message detail reporting (SMDR) event debug
messages.
Optional. Activates SMDR event debug messages for a specific to or from
number.
Activates all station account event debug messages.
Optional. Activates station account event debug messages for a specific
extension.
Activates status group event debug messages.
Activates simple voice event debug messages.
Activates all switchboard event debug messages.
Optional. Activates switchboard event debug messages for a specific
subsource.
Activates switchboard call state machine event debug messages.
Optional. Activates switchboard call state machine event debug messages
for a specific subsource.
Activates switchboard call connection manager event debug messages.
Activates all tone service events debug messages.
Optional. Activates tone service events debug messages for the specified
interface type. For example, for a foreign exchange station (FXS) interface,
use fxs.
Optional. Activates tone service events debug messages for the specified
interface type.
Optional. Activates tone service events debug messages for the specified
slot and port of the interface type. For example, for an individual FXS port
use, fxs 0/1.
Activates all trunk account event debug messages.
Optional. Activates trunk account event debug messages for a specific
trunk.
Activates all trunk manager event debug messages.
Optional. Activates trunk manager event debug messages for a specific
trunk.
Activates all trunk port event debug messages.
Optional. Activates trunk port event debug messages for a specific slot,
port, and digital signal 0 (DS0).
Optional. Displays the entire running configuration to the terminal screen
(versus only the nondefault values).
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
375