ADTRAN AOS Version R10.1.0 Command Reference Manual page 235

Command Reference Guide
debug desktop-auditing
Use the debug desktop-auditing command to enable debug messages for clients connected to the
network. The desktop auditing debug messages include the network access protection (NAP) messages
sent between clients and the server. Debug messages can be activated for all clients connected to the
network, or only for specific clients. Using the no form of this command disables debug messaging for
desktop auditing clients. Variations of this command include:
debug desktop-auditing
debug desktop-auditing hostname <hostname>
debug desktop-auditing interface gigabit-switchport <slot/port>
debug desktop-auditing ip <ip address>
debug desktop-auditing mac <mac address>
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
hostname <hostname>
interface gigabit-switchport <slot/port>
ip <ip address>
mac <mac address>
Default Values
No default values are necessary for this command.
Command History
Release 17.8
60000CRG0-35E
Optional. Activates debug messages only for the client with
the specified host name.
Optional. Activates debug messages only for the client using
the specified interface.
Optional. Activates debug messages only for the client with
the specified IP address. IP addresses should be expressed
in dotted decimal notation (for example, 10.10.10.1).
Optional. Activates debug messages only for the client with
the specified medium access control (MAC) address. MAC
addresses should be expressed in the following format:
xx:xx:xx:xx:xx:xx (for example, 00:A0:C8:00:00:01).
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
235