ADTRAN AOS Version R10.1.0 Command Reference Manual page 262

Command Reference Guide
debug frame-relay lmi
Use the debug frame-relay lmi command to activate debug messages associated with the Frame Relay
operation for the local management interface (LMI), such as data link connection identifier (DLCI) status
signaling state, etc. Debug messages are displayed (real time) to the terminal (or Telnet) screen. Use the no
form of this command to disable the debug messages.
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
No subcommands.
Default Values
By default, all debug messages in AOS are disabled.
Command History
Release 1.1
Release 17.6
Functional Notes
The debug frame-relay lmi command activates debug messages to aid in the troubleshooting of Frame
Relay links.
Usage Examples
The following example activates debug messages associated with Frame Relay LMI operation:
>enable
#debug frame-relay lmi
60000CRG0-35E
Command was introduced.
Command was altered to remove events and llc2 options.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
262