ADTRAN AOS Version R10.1.0 Command Reference Manual page 210

Command Reference Guide
copy startup-config
Use the copy startup-config command to create a copy of the current startup configuration file and replace
the current running configuration or save it to a specified memory location.
Variations of this command (valid on all AOS units) include:
copy startup-config <filename>
copy startup-config http <url>
copy startup-config https <url>
copy startup-config running-config
copy startup-config tftp
copy startup-config xmodem
Variations of this command (valid only on AOS units WITH CompactFlash
copy startup-config cflash <filename>
copy startup-config flash <filename>
Variations of this command (valid only on AOS units WITH ramdisk enabled) include:
copy startup-config ramdisk <filename>
Variations of this command (valid only on AOS units WITH Universal Serial Bus (USB) flash drive
capability) include:
copy startup-config usbdrive0 <filename>
Syntax Description
cflash
flash
<filename>
http <url>
https <url>
ramdisk <filename>
running-config
60000CRG0-35E
Copies the startup configuration and saves it to the CompactFlash card
using the specified file name.
Copies the startup configuration and saves it to flash memory using the
specified file name.
Specifies the filename to use when saving the startup configuration file.
Copies the startup configuration file and transfers it to a Hypertext Transfer
Protocol (HTTP) server using the specified HTTP server uniform resource
locator (URL). Uses HTTP PUT operation.
Copies the startup configuration file and transfers it to a secure socket
Hypertext Transfer Protocol Secure (HTTPS) server using the specified
HTTPS server URL. Uses HTTPS PUT operation.
Copies current startup configuration to the volatile RAM disk using the
specified file name.
Merges the current running configuration with the startup configuration.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
®
capability) include:
210