Debug Vrrp - ADTRAN AOS Version R10.1.0 Command Reference Manual

Command Reference Guide

debug vrrp

Use the debug vrrp command to enable Virtual Router Redundancy Protocol (VRRP) debug messages.
Debug messages are displayed (real time) on the terminal (or Telnet) screen. Use the no form of this
command to disable the debug messages. Variations of this command include the following:
debug vrrp
debug vrrp error
debug vrrp interface <interface> error
debug vrrp interface <interface> group <number> error
debug vrrp interface <interface> group <number> packet
debug vrrp interface <interface> packet
debug vrrp packet
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
error
interface <interface>
group <number>
error
packet
packet
Default Values
By default, all debug messages in AOS are disabled.
Command History
Release 16.1
Release A4.01
60000CRG0-35E
Optional. Displays debug messages for all VRRP errors in all groups on all
interfaces or on a specified interface.
Optional. Displays debug messages for all VRRP groups on the specified
interface. Specify an interface in the format <interface type [slot/port |
slot/port.subinterface id | interface id | interface id.subinterface id]>. For
example, for an Ethernet subinterface, use eth 0/1.1; for a PPP interface,
use ppp 1; for an ATM subinterface, use atm 1.1; and for a virtual local area
network (VLAN) interface, use vlan 1. Type debug vrrp interface ? for a
complete list of valid interfaces.
Optional. Specifies debug messages for a single VRRP group on a
specified interface are generated. Group numbers range from 1 to 255.
Optional. Displays debug messages for VRRP errors for a single group on a
specified interface.
Optional. Displays debug messages for VRRP packets for a single group on
a specified interface.
Optional. Displays debug messages for all VRRP packets in all groups on
all interfaces or on a specified interface.
Command was introduced.
Command was expanded to include the Metro Ethernet Forum (MEF)
Ethernet interface.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
378