ADTRAN AOS Version R10.1.0 Command Reference Manual page 286

Command Reference Guide
debug ip firewall alg sip
Use the debug ip firewall alg sip command to activate debug messages associated with Session Initiation
Protocol (SIP) information with AOS firewall operation. Debug messages are displayed (real time) on the
terminal (or Telnet) screen. Use the no form of this command to disable the debug messages. Variations of
this command include:
debug ip firewall alg sip
debug ip firewall alg sip packets
debug ip firewall alg sip verbose
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
packets
verbose
Default Values
By default, all debug messages in AOS are disabled.
Command History
Release 9.3
Release A1
Release 17.9
Release R10.1.0
Usage Examples
The following example activates debug messages associated with SIP information with AOS firewall
operation:
>enable
#debug ip firewall alg sip
60000CRG0-35E
Optional. Activates firewall application-level gateway (ALG) SIP packet
debug messages.
Optional. Activates detailed debug messages.
Command was introduced.
Command was expanded to include the packets parameter.
Command was changed to require the ip keyword for ADTRAN
internetworking products only.
Command was changed to require the ip keyword for ADTRAN voice
products.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
286