Global Configuration Mode Command Set - ADTRAN AOS Version R10.1.0 Command Reference Manual

Command Reference Guide
G C
LOBAL ONFIGURATION
To activate the Global Configuration mode, enter the configuration command at the Enable mode prompt.
For example:
>enable
#configure terminal
(config)#
The following commands are common to multiple command sets and are covered in a centralized section
of this guide. For more information, refer to the sections listed below:
cross-connect on page 67
description <text> on page 70
do on page 71
end on page 72
exit on page 73
interface on page 74
shutdown on page 82
All other commands for this command set are described in this section in alphabetical order.
aaa accounting commands begin on page 858
aaa authentication commands begin on page 866
aaa authorization commands begin on page 878
aaa group server on page 886
aaa local authentication attempts max-fail <number> on page 888
aaa on on page 889
aaa processes <value> on page 890
arp <ip address> <mac address> arpa on page 891
as-path-list <name> on page 892
auto-config on page 893
auto-link on page 895
auto-link recontact-interval <value> on page 896
auto-link server <hostname | ip address> on page 897
banner on page 898
boot config on page 899
boot system on page 901
boot voip on page 903
bridge irb on page 904
bridge <number> protocol ieee on page 906
clock on page 907
60000CRG0-35E
M C
ODE OMMAND
Copyright © 2012 ADTRAN, Inc.

Global Configuration Mode Command Set

S
ET
852