ADTRAN AOS Version R10.1.0 Command Reference Manual page 829

Command Reference Guide
Usage Examples
The following is sample output from the show vrf command:
>enable
#show vrf
Name Default RD
-Default- 0:0
Engineering 100:1
Accounting 100:2
The following is sample output from the show vrf interfaces command:
>enable
#show vrf interfaces
Interface IP Address
eth 0/1 10.0.0.1
ppp 1 10.0.1.1
vlan 11 1.1.1.1
vlan 12 1.1.2.1
vlan 21 2.1.1.1
60000CRG0-35E
Interfaces
eth 0/1
ppp 1
vlan 11
vlan 12
vlan 21
vlan 22
VRF Protocol
DOWN
UP
Engineering UP
Engineering UP
Accounting UP
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
829