ADTRAN AOS Version R10.1.0 Command Reference Manual page 948

Command Reference Guide
event-history priority
Use the event-history priority command to set the threshold for events stored in the event history. All
events with the specified priority or higher will be kept for viewing in the local event log. The event log
may be displayed using the show event-history command. Use the no form of this command to keep
specified priorities from being logged. Variations of this command include:
event-history priority debug
event-history priority error
event-history priority fatal
event-history priority info
event-history priority notice
event-history priority warning
Syntax Description
debug
error
fatal
info
notice
warning
Default Values
By default, no event messages are logged to the event history.
Command History
Release 1.1
Release R10.1.0
Functional Notes
The event history provides useful information regarding the status of the system and individual port states.
Use the event history as a troubleshooting tool when identifying system issues. The following is a sample
event history log.
Router#show event-history
Using 526 bytes
2002.07.12 15:34:01 T1.t1 1/1 Yellow
2002.07.12 15:34:01 INTERFACE_STATUS.t1 1/1 changed state to down.
2002.07.12 15:34:02 T1.t1 1/1 No Alarms
2002.07.12 15:34:02 INTERFACE_STATUS.t1 1/1 changed state to up.
2002.07.12 15:34:03 INTERFACE_STATUS.eth 0/1 changed state to up.
2002.07.12 15:34:10 OPERATING_SYSTEM Warm Start
2002.07.12 15:34:12 PPP.NEGOTIATION LCP up
2002.07.12 15:34:12 PPP.NEGOTIATION IPCP up
60000CRG0-35E
Logs subsystem debugging events.
Logs events with error and fatal priorities.
Logs only events with a fatal priority.
Logs all events.
Logs events with notice, warning, error, and fatal priorities.
Logs events with warning, error, and fatal priorities.
Command was introduced.
Command was expanded to include the debug keyword.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
948