ADTRAN AOS Version R10.1.0 Command Reference Manual page 1085

Command Reference Guide
ip rtp quality-monitoring filter
Use the ip rtp quality-monitoring filter command to filter the number of Realtime Transport Protocol
(RTP) voice streams monitored by voice quality monitoring (VQM). Use the no form of this command to
remove the filter. Variations of this command include:
ip rtp quality-monitoring filter user <user>
ip rtp quality-monitoring filter access-class <name>
Syntax Description
user <user>
access-class <name>
Default Values
By default, VQM is not filtered by user or ACL.
Command History
Release A1
Usage Examples
The following example specifies that VQM only monitor RTP streams that match the previously configured
ACL, 4thFloorUsers:
(config)#ip rtp quality-monitoring filters access-class 4thFloorUsers
60000CRG0-35E
Specifies that only calls from certain users are measured. Users are
specified by Session Initiation Protocol (SIP) To or From headers, in the
format user@host. Multiple users can be monitored simultaneously.
Specifies that only RTP streams that match the previously configured
access control list (ACL) are measured. The <name> parameter is the ACL
to be used. Only one ACL can be applied to VQM at a time.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1085