ADTRAN AOS Version R10.1.0 Command Reference Manual page 540

Command Reference Guide
show ip cache
Use the show ip cache command to display the contents of the Internet Protocol version 4 (IPv4) route
cache for each interface in a given virtual private network (VPN) routing and forwarding (VRF) instance.
The route cache contains information about which egress interface, IPv4 gateway address, and MAC
address to use when forwarding packets to a given destination. Variations of this command include:
show ip cache
show ip cache vrf <name>
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Syntax Description
vrf <name>
Default Values
No default values are necessary for this command.
Command History
Release 9.3
Release 16.1
Release 17.1
Functional Notes
VRF on AOS products allows a single physical router to be partitioned into multiple virtual routers. Each
router instance has its own route table and interface assignments. Beginning with Release 16.1, all AOS
routers supporting multiple VRF instances (multi-VRF) have an unnamed default VRF instance regardless
of whether multi-VRF is configured. Therefore, executing the abovementioned commands without
specifying a VRF will only affect the default unnamed VRF.
60000CRG0-35E
Optional. Specifies a nondefault VRF instance for which to display route
cache information. If no VRF instance is specified, route cache information
for the default VRF instance is displayed.
Command was introduced.
Command was expanded to include the vrf parameter.
Command was expanded to include the modifiers begin, exclude, and
include.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
540