ADTRAN AOS Version R10.1.0 Command Reference Manual page 790

Command Reference Guide
show voice conference local
Use the show voice conference local command to view current conference sessions. Variations of this
command include:
show voice conference local all
show voice conference local session <number>
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Syntax Description
all
session <number>
Default Values
No default values are necessary for this command.
Command History
Release A2
Usage Examples
The following example displays information about all local active conference sessions:
>enable
#show voice conference local all
ID Originator (FXS)
---- ----------------------
1 2001 (0/1)
2 2004 (0/4)
The following example only displays information for local conference session 2:
>enable
#show voice conference local session 2
ID Originator (FXS)
---- --------------------
2 2004 (0/4)
60000CRG0-35E
Displays current status of all local conference sessions.
Displays current status of the specified local conference session.
Command was introduced.
Remote1
--------------------
T01 (2565551234)
2002 (FXS 0/2)
Remote1 Remote2
-------------------- --------------------
2002 (FXS 0/2) 3001 (SIP)
Copyright © 2012 ADTRAN, Inc.
83.
Remote2 RtpRsrc
-------------------- -------------
T02 (2568675309) 0/1.(1,2,3)
3001 (SIP) 0/2.(1,4,5)
RtpRsrc
----------------
0/2.(1,4,5)
Enable Mode Command Set
790