Table of Contents
Advertisement
Command Reference Guide
ip sip proxy failover codec-group <name>
Use the ip sip proxy failover codec-group command to specify the Session Initiation Protocol (SIP)
proxy server's coder-decoder (CODEC) when the system is in failover mode. Use the no form of this
command to return to the default setting.
Syntax Description
<name>
Default Values
By default, no CODEC list is configured or applied.
Command History
Release 16.1
Functional Notes
The ip sip proxy failover codec-group command is available on AOS voice products only. This
command is not available on AOS data products. For more information regarding CODEC list
configuration, refer to the
For more information regarding SIP proxy configuration, refer to the Configuring SIP Proxy in AOS
configuration guide available online at
Usage Examples
The following example enables the CODEC list named List1 during failover:
(config)#ip sip proxy failover codec-group List1
60000CRG0-35E
Specifies the name of a previously created CODEC list to be used during
failover.
Command was introduced.
Voice CODEC List Command Set on page
https://supportforums.adtran.com
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
3803.
(article number 2183).
1136
Advertisement
Table of Contents
