ADTRAN AOS Version R10.1.0 Command Reference Manual page 332

Command Reference Guide
debug isdn verbose
Use the debug isdn verbose command to activate all debug messages associated with integrated services
digital network (ISDN) events in AOS. Debug messages are displayed (real time) to the terminal (or
Telnet) screen. Use the no form of this command to disable the debug messages.
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
No subcommands.
Default Values
By default, all debug messages in AOS are disabled.
Command History
Release 11.1
Usage Examples
The following example activates all debug messages associated with ISDN activity:
>enable
#debug isdn verbose
60000CRG0-35E
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
332