Command Reference Guide
debug ip route-cache express
Use the debug ip route-cache express command to activate debug messages associated with Layer 3
switching.
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
No subcommands.
Default Values
By default, all debug messages in AOS are disabled.
Command History
Release 17.5
Usage Examples
The following is sample output for this command:
>enable
#debug ip route-cache express
xRt: Periodic ARP for 10.2.42.254
xRt: Processed 1 ARP events, with 0 remaining
xRt: host entry added: IP=192.168.1.10, MAC=00:10:94:00:00:01, Vlan=1
xRt: host entry added: IP=192.168.3.10, MAC=00:10:95:00:00:01, Vlan=3
xRt: host entry not added (no ARL entry): IP=192.168.5.10, MAC=00:10:96:00:00:01, Vlan=5
xRt: host entry added: IP=192.168.7.10, MAC=00:10:97:00:00:01, Vlan=7
xRt: host entry added: IP=192.168.9.10, MAC=00:10:98:00:00:01, Vlan=9
xRt: host entry added: IP=192.168.11.10, MAC=00:10:99:00:00:01, Vlan=11
xRt: host entry added: IP=192.168.13.10, MAC=00:10:9a:00:00:01, Vlan=13
xRt: host entry not added (no ARL entry): IP=192.168.15.10, MAC=00:10:9b:00:00:01, Vlan=15
xRt: host entry added: IP=192.168.17.10, MAC=00:10:9c:00:00:01, Vlan=17
xRt: host entry added: IP=192.168.19.10, MAC=00:10:9d:00:00:01, Vlan=19
xRt: Processed 10 ARP events, with 605 remaining
xRt: Processed 10 L2 events, with 393 remaining
xRt: host entry added (ARL entry found): IP=192.168.1.20, MAC=00:10:94:00:00:0b, Vlan=1
xRt: host entry added (ARL entry found): IP=192.168.15.10, MAC=00:10:9b:00:00:01, Vlan=15
xRt: host entry added (ARL entry found): IP=192.168.3.18, MAC=00:10:95:00:00:09, Vlan=3
xRt: host entry added (ARL entry found): IP=192.168.3.41, MAC=00:10:95:00:00:20, Vlan=3
xRt: Processed 10 L2 events, with 217 remaining
xRt: Processed 10 ARP events, with 228 remaining
60000CRG0-35E
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
305