ADTRAN AOS Version R10.1.0 Command Reference Manual page 1050

Adtran operating system (aos)
Table of Contents

Advertisement

Command Reference Guide
ip mgcp persistent-notify
Use the ip mgcp persistent-notify command to enable persistent event notification to the Media Gateway
Control Protocol (MGCP) call agent. Use the no form of this command to disable persistent notification.
Variations of this command include:
ip mgcp persistent-notify hd
ip mgcp persistent-notify hu
ip mgcp persistent-notify hf
Multiple combinations of the hd, hu, and hf parameters can be entered.
Enabling persistent notification when it is not required can cause unexpected and
undesired operation.
Syntax Description
hd
hu
hf
Default Values
By default, persistent notification is disabled.
Command History
Release A2
Functional Notes
When persistent notification is disabled, the media gateway will not send event notifications of endpoint
hang down (hd), hang up (hu), or hook flash (hf). When the feature is enabled, the media gateway will
send notification of endpoint events even if it has not received a notification request from the call agent.
Some call agents require the use of persistent notification. For example, sometimes hd notification is
required for initial dial tone once the link has become active. Refer to the configuration materials provided
with your call agent for more information.
Usage Examples
The following example enables persistent notification of endpoint hang down:
(config)#ip mgcp persistent-notify hd
60000CRG0-35E
Specifies that notification of endpoint hang down is sent to the call agent.
Specifies that notification of endpoint hang up is sent to the call agent.
Specifies that notification of endpoint hook flash is sent to the call agent.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1050

Advertisement

Table of Contents
loading

Related Products for ADTRAN AOS Version R10.1.0

This manual is also suitable for:

Aos r10.1.0

Table of Contents