ADTRAN AOS Version R10.1.0 Command Reference Manual page 954

Command Reference Guide Global Configuration Mode Command Set
gvrp
Use the gvrp command to enable GARP VLAN Registration Protocol (GVRP) on the switch globally. Use
the no form of this command to disable this feature.
Syntax Description
No subcommands.
Default Values
By default, GVRP is disabled.
Command History
Release 8.1 Command was introduced.
Functional Notes
Disabling GVRP globally will disable GVRP on all interfaces.
Usage Examples
The following example enables GVRP on the switch globally:
(config)#gvrp
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 954