Table of Contents
Advertisement
Command Reference Guide
ip sip inbound-trunk-matching
Use the ip sip inbound-trunk-matching command to enable and configure inbound trunk matching. Use
the no form of this command to return to the default settings. Variations of this command include:
ip sip inbound-trunk-matching default-trunk <Txx>
ip sip inbound-trunk-matching prefer trunk-routing
ip sip inbound-trunk-matching require-registration
Syntax Description
default-trunk <Txx>
prefer trunk-routing
require-registration
Default Values
By default, there is no default trunk set and the require-registration option is disabled.
Command History
Release A2.03
Release A4.01
Usage Examples
The following example configures AOS to require registration for inbound trunk matching:
(config)#ip sip inbound-trunk-matching require-registration
60000CRG0-35E
Specifies a trunk to use when matching fails. The trunk is specified in the format
Txx (e.g., T01).
Specifies that trunk matches are preferred over users.
Indicates that the request uniform resource identifier (URI) user is required to be
registered on a trunk.
Command was introduced.
Command was expanded to include the prefer trunk-routing parameter.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1125
Advertisement
Table of Contents
