ADTRAN AOS Version R10.1.0 Command Reference Manual page 486

Adtran operating system (aos)
Table of Contents

Advertisement

Command Reference Guide
show ethernet cfm domain
Use the show ethernet cfm domain command to display Ethernet operations, administration, and
maintenance (OAM) connectivity fault management (CFM) maintenance domain (MD) configuration and
statistical information. Variations of this command include:
show ethernet cfm domain
show ethernet cfm domain <domain name>
show ethernet cfm domain <domain name> detail
show ethernet cfm domain detail
show ethernet cfm domain none
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the
Enable Mode Command Set on page
Syntax Description
<domain name>
detail
none
Default Values
No default values are necessary for this command.
Command History
Release 17.4
Functional Notes
For more information regarding Ethernet OAM CFM and its operation on AOS products, refer to the
Ethernet OAM CFM in AOS configuration guide available online at
(article number 3013).
60000CRG0-35E
Optional. Specifies that output is limited to associations in the specified
domain.
Optional. Specifies the output is displayed in detail, rather than summary,
format.
Optional. Specifies that no domain name is used.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
https://supportforums.adtran.com
486

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for ADTRAN AOS Version R10.1.0

This manual is also suitable for:

Aos r10.1.0

Table of Contents