ADTRAN AOS Version R10.1.0 Command Reference Manual page 784

Command Reference Guide
show version
Use the show version command to display the current ADTRAN Operating System (AOS) version
information.
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Syntax Description
No subcommands.
Default Values
No default values are necessary for this command.
Command History
Release 1.1
Release 17.1
Usage Examples
The following is sample output from the show version command:
>enable
#show version
ADTRAN, Inc. OS version A5.01.00.E
Mainline Version: M04
Checksum: 894C9C39
Built on: Fri Sep 09 11:31:09 2011
Upgrade key: 29be9733e227e21d8f7d4af849dc7603
Hardware version C.1
Boot ROM version A3.01.00
Checksum: 6A26
Built on: Wed Jul 08 16:52:15 2009
Copyright (c) 1999-2009, ADTRAN, Inc.
Platform: Netvanta 6334, part number 17006334G1, CLEI code is N/A
Serial number LBADTN0940AD077
Flash: 67108864 bytes DRAM: 134217727 bytes
60000CRG0-35E
Command was introduced.
Command was expanded to include the modifiers begin, exclude, and
include.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
784