ADTRAN AOS Version R10.1.0 Command Reference Manual page 447

Command Reference Guide
show cflash
Use the show cflash command to display a list of all files currently stored in CompactFlash
details about a specific file stored in CompactFlash memory. Variations of this command include:
show cflash
show cflash <filename>
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Syntax Description
<filename>
Default Values
No default values are necessary for this command.
Command History
Release 12.1
Release 17.1
Usage Examples
The following is sample output from the show cflash command:
>enable
#show cflash
(dir) 0 SystemDefaultPrompts
(dir) 0 VoiceMail
9377163 NV7100A-12-00-23-E.biz
11110890 sip.ld
8767439 NV7100A-11-03-02-E.biz
8771176 NV7100A-11-03-02d-E.biz
8773148 NV7100A-11-03-03-E.biz
48508928 bytes used, 207319040 available, 255827968 total
60000CRG0-35E
Optional. Displays details for a specified file located in flash memory. Enter
a wildcard (such as *.biz) to display the details for all files matching the
entered pattern.
Command was introduced.
Command was expanded to include the modifiers begin, exclude, and
include.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
®
memory or
447