ADTRAN AOS Version R10.1.0 Command Reference Manual page 470

Command Reference Guide
local-violators
mac <mac address>
server-restricted
server-violators
Default Values
No default values are necessary for this command.
Command History
Release 17.8
Functional Notes
Output of the show desktop-auditing dhcp command can be limited by specific client or by specific
criteria (feature states), but not by both.
Local policies are defined by using the command
For more information about configuring local policies, refer to
on page 3037.
For more information about configuring desktop auditing, refer to the Configuring Desktop Auditing in AOS
configuration guide available online at https://supportforums.adtran.com.
Usage Examples
The following is sample output from the show desktop-auditing dhcp command:
#show desktop-auditing dhcp
Client MAC/IP: 00:E0:29:0E:D5:E3 / 10.23.220.1 / xpsp3-host
Collected: DHCP
VLAN ID: 100
Source Port: gigabit-switchport 0/2
Date/Time Collected: 2009.08.25 10:33:42
Client NAP: Enabled
Server NAP: Enabled
Client OS Version: Windows XP
Client OS Service Pack: 3
Client Processor Architecture: x86 architecture
Client Firewall: Microsoft
Disabled but Up-To-Date
Client Antivirus: Symantec Antivirus Corporate Edition
60000CRG0-35E
Optional. Displays NAP information only for clients that
violate the local policy.
Optional. Displays NAP information only for the client at the
specified medium access control (MAC) address. MAC
addresses should be expressed in the following format:
xx:xx:xx:xx:xx:xx (for example, 00:A0:C8:00:00:01).
Optional. Displays NAP information only for the clients
restricted by the server.
Optional. Displays NAP information only for the clients that
violate the server policy.
Command was introduced.
desktop-auditing local-policy on page
Desktop Auditing Local Policy Command Set
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
933.
470