ADTRAN AOS Version R10.1.0 Command Reference Manual page 290

Command Reference Guide
debug ip igmp snooping
Use the debug ip igmp snooping command to enable debug messages for Internet Group Management
Protocol (IGMP) snooping errors and events. Debug messages are displayed (real time) on the terminal (or
Telnet) screen. Use the no form of this command to disable the debug messages. Variations of this
command include:
debug ip igmp snooping
debug ip igmp snooping verbose
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
verbose
Default Values
By default, all debug messages in AOS are disabled.
Command History
Release 12.1
Usage Examples
The following example enables IGMP snooping debug messages:
>enable
#debug ip igmp snooping
60000CRG0-35E
Optional. Enables detailed debug messages.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
290